Multiflex Raised Straight Edge Splashwell Steering Mount LM-S-2
LM-S-2
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 4 items left
- Backordered, shipping soon
Multiflex Raised Straight-Edge Splashwell Mount
Multiflex Marine Component | LM-S-2
LM-S-2 is the raised straight-edge version of the Multiflex splashwell steering mount. It supports a compatible mechanical steering cable on the transom/splashwell when a conventional outboard tilt-tube cable connection is not available.
Key Features
- ✔ Raised straight-edge splashwell mounting profile
- ✔ Structural support for mechanical steering cable
- ✔ Alternative to tilt-tube mounting
- ✔ For remote cable-to-link-arm installations
- ✔ Exact replacement LM-S-2
Technical Specs
| Type | Raised straight-edge splashwell mount |
| System | Mechanical steering cable |
| Location | Transom / splashwell |
| Related plate version | LM-S-1 |
| Part number | LM-S-2 |
Compatibility / Fitment Guide
Application: boats where the steering cable cannot be supported through the engine tilt tube and the splashwell edge provides the correct raised straight mounting face.
Profile check: compare the mounting face, cable-support height, bolt pattern and cable alignment with the boat. The cable must run without side-load and provide balanced port/starboard travel through the correct link arm.
Structural and clearance checks: the panel must withstand steering loads. Confirm full cable stroke, engine trim/tilt movement, splashwell clearance and the complete steering-system rating before drilling.
Not interchangeable by name alone: LM-S-2 and LM-S-1 use different mounting profiles; order by exact part and hull geometry.
Part Number Cross Reference
| Multiflex part | LM-S-2 |
| Mount description | Raised straight-edge splashwell mount |
| Related alternative | LM-S-1 plate-style mount |
Frequently Asked Questions
What makes LM-S-2 different from LM-S-1?
LM-S-2 has the raised straight-edge mounting form; LM-S-1 is the plate-style version.
Does this replace the steering helm?
No. It only supports the cable at the splashwell.
Is an engine link arm needed?
Usually yes, depending on the cable-to-tiller arrangement.
Can it be selected by engine brand?
No. Hull profile, cable interface, geometry and system load determine fitment.
Verify the exact part number, dimensions and complete installation before purchase. Steering and engine-control components should be installed and tested by a competent marine technician.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
