Blue Sea 1007100 Side-Mount CableClam 7.1mm Cable 25.4mm Plug
8-21007100
- Dispatched in 2-3 days
- 30 Day Return Policy
- In stock, ready to ship
- Backordered, shipping soon
Blue Sea Side-Mount CableClam
Pre-drilled side entry with 316 stainless dress cap
The Blue Sea Systems side-entry CableClam routes an antenna or electronics cable through a vertical surface without removing the factory-fitted connector. Its pre-drilled seal accepts a cable up to 7.11mm diameter while the assembly can pass a connector up to 25.4mm.
Key Features
- Waterproof side entry for pre-terminated cables
- No need to remove the factory connector
- Low-profile contoured body reduces line snagging
- Polished 316 stainless-steel dress cap
- UV-stabilised thermoplastic ring and Buna-N rubber seal
- Installation fasteners included
Technical Specs
| Manufacturer | Blue Sea Systems |
| Manufacturer code | 1007100 / 1007100-BSS |
| Distributor code | 8-21007100 |
| Maximum cable diameter | 7.11mm (0.28in) |
| Maximum connector diameter | 25.4mm (1in) |
| Dress cap | 316 stainless steel |
| Ring | UV-stabilised thermoplastic |
| Seal | UV-stabilised Buna-N rubber |
| Installation zone | Above waterline only |
| 4Boats SKU | 8-21007100 |
Compatibility / Fitment Guide
| Check | Compatible when | Do not use when |
|---|---|---|
| Cable diameter | Finished cable OD is 7.11mm or smaller. | Cable is larger than the pre-drilled seal. |
| Connector diameter | Factory connector is 25.4mm or smaller and can pass through the mounting opening. | Connector exceeds 25.4mm. |
| Mounting surface | Suitable vertical/side surface above the waterline with clearance behind. | Below-waterline penetration or a submerged compartment boundary. |
| Cable type | Antenna/electronics cable can tolerate the required bend radius and side entry. | Cable or connector manufacturer prohibits the bend/installation geometry. |
Part Number Cross Reference
| Blue Sea base number | 1007100 |
| Manufacturer SKU | 1007100-BSS |
| Aquafax / distributor code | 8-21007100 |
| 4Boats SKU | 8-21007100 |
Part-number suffixes can reflect packaging/distribution. The dimensional limits and above-waterline restriction are the decisive fitment checks.
Frequently Asked Questions
Can it pass a 1-inch connector?
Yes, up to the stated maximum of 25.4mm (1in), provided the mounting opening and routing clearance are suitable.
What is the maximum cable diameter?
7.11mm (0.28in). Measure the cable jacket, not the connector.
Can it be installed below the waterline?
No. Blue Sea specifies this CableClam for above-waterline use only.
Is the stainless cap the sealing element?
No. The cap covers the hardware; sealing is provided by the CableClam body and Buna-N rubber seal when installed correctly.
Before ordering or installation: compare all dimensions, interface details and manufacturer codes above.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
