SEAFLO Pressure Pump 23A Series 12V 1.9 lpm/0.5 gpm 70 psi/4.8 bar - 4Boats
SEAFLO Pressure Pump 23A Series 12V 3.8 lpm/1.0 gpm 40 psi/2.8 bar - 4Boats
SEAFLO Pressure Pump 23A Series 12V 1.9 lpm/0.5 gpm 70 psi/4.8 bar - 4Boats
SEAFLO Pressure Pump 23A Series 12V 1.9 lpm/0.5 gpm 70 psi/4.8 bar - 4Boats

SEAFLO 12V 1.0GPM 40PSI Compact Water Pressure Pump 23A Series

DP101004023A

  • Dispatched in 2-3 days
  • 30 Day Return Policy
  • In stock, ready to ship
  • Backordered, shipping soon
Our stock levels are dynamic and can change frequently. If a product appears to be in stock, it may have already sold out. Please contact us if you have any questions about availability. Thank you for your understanding.

Regular price£64.95
/
Tax included.

Compact on-demand diaphragm pump

A small 12V self-priming pressure pump for compact water systems requiring up to 1.0GPM open flow and a 40PSI shut-off setting. The on-demand switch automatically runs the pump when an outlet opens and stops it when pressure is restored.

Technical specifications

Manufacturer model SFDP1-010-040-23A
Supply voltage 12V DC
Open flow 1.0GPM / 3.8LPM
Shut-off pressure 40PSI / 2.8bar
Maximum current draw 3.8A
Self-priming height Up to 1.5m / 5ft
Pump type Diaphragm pump with on-demand pressure switch
Protection IP54 with protective cover; ignition protected
Duty/features Short dry-run capability; configurable bypass/reflux design
Approximate size 18 x 10.5 x 7cm
Unit weight Approximately 0.6kg
Compliance CE and RoHS

Applications and compatibility

  • For one low-flow tap, small galley, hand-wash station, compact caravan/RV or specialist 12V water circuit.
  • Suitable where the connected appliance accepts 40PSI and demand stays within the 1.0GPM open-flow capacity.
  • Compact output is not intended for multiple simultaneous fixtures or high-volume showers.
  • Use only with compatible clean-water fluids; do not pump fuel, solvents or flammable liquids.

Installation and package contents

  • Mount dry in a ventilated position using vibration-isolating feet and allow access to the pressure switch.
  • Install a fine inlet strainer and ensure the suction side is airtight; quick-connect adapters must match the installed tubing.
  • Provide correctly sized wiring and circuit protection for the 3.8A maximum draw and cable length.
  • Package contains one SEAFLO 23A pressure pump. Port fittings vary by configuration, so verify connector type and tube size before ordering.

Frequently asked questions

Does it switch on automatically?

Yes. The pressure switch starts the pump when system pressure falls and stops it at the set pressure.

Is 1.0GPM available at 40PSI?

No. The stated 1.0GPM is open flow; delivered flow falls as pressure rises.

Can it supply several taps?

It is best suited to a single low-flow outlet because of its compact capacity.

Can it run dry?

It tolerates short dry-run periods, but continuous dry operation should be avoided.

For the products under £150 the shipping is £6.99.

Free delivery for most items over £150.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed

Why choose us

Quality marine parts and boat equipment from 4Boats UK

QUALITY MARINE PARTS

We source dependable marine products from established suppliers and continually refine our range using customer feedback.

Untitled_1080_x_1080_px_2 - 4Boats

TRUSTED SUPPLIERS

We work with trusted marine suppliers and distribution partners to provide reliable parts, equipment and fulfilment.

Simple_Image_Play_Built_into_Routine_Cosmetics_TikTok_In-Feed_Ad_1080_x_1080_px_10 - 4Boats

PERSONAL SERVICE

Every order is checked by the 4Boats team. Contact us before ordering if you need help with part numbers, compatibility or availability.