SEAFLO 24V 600GPH 13A Non-Automatic Submersible Bilge Pump
BP2G60013A
- Dispatched in 2-3 days
- 30 Day Return Policy
- In stock, ready to ship
- Backordered, shipping soon
Compact 24V bilge drainage with serviceable cartridge design
The SEAFLO 13A Series 600 GPH pump is a compact 24V DC non-automatic submersible bilge pump for small boat bilges, lockers and drainage compartments. It is suitable for yachts, motorboats, RIBs, tenders and fishing boats where the required installed capacity matches the compartment risk.
This version does not contain an automatic level sensor. It must be operated through a separate manual panel switch, float switch or suitable bilge-pump controller.
Design and service features
- Split quick-connect cartridge design lets the motor module be removed without disturbing the fixed base or plumbing.
- Removable threaded straight discharge fitting and hose-adapter system simplify installation.
- Integrated check valve helps reduce water flowing back from the discharge hose.
- Submersible and ignition-protected construction for marine bilge service.
- Stainless-steel motor shaft, moisture-tight seals, blocked tinned marine wiring and anti-airlock protection.
- Efficient low-current motor with quiet operation.
- Designed to meet CE, RoHS, ISO 8846 and ISO 8849 requirements.
Technical specification
| Manufacturer model | SFBP2-G600-13A |
| Replacement motor model | SFMA2-G600-13A |
| Operating mode | Non-automatic; external control required |
| Supply voltage | 24V DC |
| Open-flow capacity | 600 GPH (approximately 2270 L/h) |
| Rated current | 1.5 A |
| Maximum head | 2.5 m (7.5 ft) |
| Outlet range for series | 19 mm (3/4 in) and 29 mm (1-1/8 in), depending on supplied adapter |
| Approximate size | 122.7 × 76 × 120 mm |
| Approximate unit weight | 0.47 kg |
Boat compatibility and installation checks
- For 24V DC marine systems only; do not connect directly to a different nominal voltage.
- 600 GPH is an open-flow rating. Installed output falls with vertical lift, hose length, bore, bends, fittings and restrictions.
- Use reinforced smooth-bore hose matched to the selected 19/29 mm outlet, keep the run short and rising, and provide anti-siphon protection where required.
- Size the fuse, switching device and marine-grade cable for up to the pump circuit's rated demand, allowing for cable length and voltage drop.
- Mount the strainer at the lowest practical point, keep it accessible for cleaning and test the complete system regularly.
- Use only for bilge water. It is not suitable for fuel, oil, sewage, drinking water or abrasive liquids.
- Package: one 13A Series pump with supplied base/check-valve discharge parts. External switch, hose, fuse and main wiring are installation items.
Frequently asked questions
Does this pump switch on automatically?
No. Use a separate manual switch, float switch or compatible controller.
Can it be installed on a 12V boat?
No. This is the 24V model; use the equivalent 12V version for a 12V supply.
Can the motor be serviced without removing the hose?
The cartridge-style design is intended to let the motor section separate from the installed base and plumbing.
Is 600 GPH the real flow in my boat?
It is the nominal open-flow rating. Actual discharge is lower once lift and hose resistance are added.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
