SEAFLO 24V 3000GPH 13A High Capacity Non-Automatic Bilge Pump
BP2G300013A
- Dispatched in 2-3 days
- 30 Day Return Policy
- In stock, ready to ship
- Backordered, shipping soon
Heavy-duty 24V drainage for yachts and workboats
The SEAFLO SFBP2-G3000-13A is a 24V DC, 3000 GPH non-automatic submersible bilge pump designed for larger yachts, motorboats, fishing vessels and workboats requiring high-volume water removal.
It requires a separate manual switch, correctly rated float switch, relay or bilge controller. The modular cartridge design allows the motor section to be removed while the base and discharge plumbing remain installed.
Heavy-duty design features
- 3000 GPH nominal open-flow capacity with maximum head of 5.5 m.
- Quick-connect split cartridge for cleaning and motor replacement.
- Fully submersible, ignition-protected marine construction.
- Stainless-steel shaft, anti-airlock protection and moisture-tight seals.
- High-efficiency low-current 24V motor.
- Snap-off strainer base for debris inspection.
- Pump and switching equipment are separate components.
- Designed to meet CE, RoHS, ISO 8846 and ISO 8849 requirements.
Technical specification
| Manufacturer model | SFBP2-G3000-13A |
| Operating mode | Non-automatic; external control required |
| Supply voltage | 24V DC |
| Nominal open flow | 3000 GPH / approximately 11,356 L/h |
| Rated current | 6 A |
| Maximum head | 5.5 m (18.04 ft) |
| Outlet range for series | 40 mm (1-1/2 in) or 52 mm (2 in); confirm exact supplied configuration |
| Mounting | Submersible strainer-base installation |
| Approximate series unit size | 170 × 125 × 200 mm |
| Approximate selling-unit weight | 2.63 kg |
Boat compatibility and installation checks
- For 24V DC vessels only; verify cable, fuse and switching for the 6 A running load and installation length.
- 3000 GPH is the nominal open-flow rating. Use the 5.5 m head limit and real plumbing losses when sizing the system.
- Confirm whether the supplied outlet is 40 or 52 mm before ordering hose or replacing another model.
- Use reinforced smooth-bore discharge hose, minimise bends and provide anti-siphon protection where required.
- Keep the strainer accessible and test both manual and automatic control paths regularly.
- Use only for bilge water, not fuel, oil, sewage, drinking water or abrasive liquid.
- Package: one 13A Series pump with base and supplied discharge parts. External control, hose, fuse and main wiring are separate.
Frequently asked questions
Does it switch on automatically?
No. It requires a separate float switch, panel switch or compatible controller.
Is 3000 GPH the installed output?
No. Lift, hose length, bore, bends and fittings reduce actual flow.
Can it be used on a 12V boat?
No. This product is the 24V version.
Can I reuse the wiring from a smaller pump?
Only after confirming cable size, fuse, switching rating and voltage drop for this pump and cable run.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
