SEAFLO 12V 800GPH Bilge Pump 13A Non-Automatic Marine Boat

Compact, serviceable 12V bilge pump

A cartridge-style submersible pump for controlled bilge drainage on 12V boats. The non-automatic 13A design works from a panel switch or compatible external float switch, while the quick-release motor cartridge and snap-lock strainer simplify maintenance.

Technical specifications

Applications and compatibility

• For 12V DC motorboats, yachts, RIBs, fishing craft and workboats where an 800GPH-class pump is appropriate.
• Can serve as a controlled primary, secondary or local compartment pump according to the vessel drainage plan.
• Compatible with a properly rated 12V panel switch or external float switch; no automatic sensor is built in.
• Do not size solely by the nominal GPH figure because lift and hose resistance reduce delivered output.

Installation and package contents

• Secure the strainer at the lowest practical bilge point and keep the cartridge accessible for cleaning.
• Use smooth-bore marine hose with minimal bends and route the discharge safely above the waterline as required.
• Wire through correctly rated circuit protection using marine-grade cable; verify polarity before operation.
• Package contains one SEAFLO 13A pump with strainer/base, check valve, removable straight discharge fitting and wiring. Control switch, float switch and hose are not stated as included.

Frequently asked questions

Is this an automatic bilge pump?

No. It requires a panel switch or compatible external float switch.

Can I run it from 24V?

No. This model is for a 12V DC supply.

Can the motor cartridge be removed?

Yes. The modular design supports quick removal for cleaning or replacement.

Why might installed flow be lower than 800GPH?

Vertical lift, hose length, bends, outlet restrictions and supply-voltage loss all reduce flow.