SEAFLO 24V 600GPH Automatic Bilge Pump 11 Series Magnetic Float
BP2G60011
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 2 items left
- Backordered, shipping soon
Automatic bilge pump with magnetic float control
A compact 24V automatic bilge pump with an integrated magnetic-drive float switch. The sealed combined unit is designed for routine bilge drainage on boats where a separate switch would take extra space, while the quick-disconnect power lead and snap-off strainer simplify servicing.
Technical specifications
| Manufacturer model | SFBP2-G600-11 |
| Supply voltage | 24V DC |
| Maximum open-flow rating | 600 GPH (approximately 2,271 L/h) |
| Rated current | 1.5A |
| Maximum current draw | 3.3A |
| Maximum head / shut-off | Approximately 2.3m |
| Control | Integrated magnetic-drive float switch |
| Wire leads | 18AWG, 1m / 3ft |
| Service features | Quick-disconnect power lead and snap-off strainer base |
| Approximate size | 17.5 x 9.2 x 11.6cm |
| Unit weight | Approximately 0.55kg |
| Compliance | CE, RoHS, ISO 8846 and ISO 8849 |
| Manufacturer warranty | 2 years |
Applications and compatibility
- For automatic routine bilge drainage on 24V DC motorboats, yachts, RIBs and small workboats.
- Best suited to compartments where the 600GPH nominal capacity and 2.3m shut-off head meet the vessel’s requirements.
- The magnetic float mechanism must remain unobstructed; install away from hoses, loose wiring and accumulated debris.
- For higher ingress risk or larger vessels, use capacity and redundancy specified by the vessel’s drainage plan.
Installation and package contents
- Mount level at the lowest accessible point with room to release the strainer and service the pump.
- Keep the discharge run short and unrestricted, with a safe above-waterline outlet arrangement.
- Connect only to a fused 24V marine circuit and size cable/protection for maximum current and run length.
- Package contains one SEAFLO 11 Series automatic bilge pump with integrated magnetic float, strainer/base, quick-disconnect lead and wiring. Hose and through-hull are not stated as included.
Frequently asked questions
Does it need a separate float switch?
No. Automatic control is integrated through a magnetic-drive float mechanism.
Can it operate on 12V?
No. This listing is for the 24V version.
Is 600GPH the flow at maximum head?
No. It is the nominal open-flow rating; output falls with lift and reaches zero near the shut-off head.
Can the pump be removed without disturbing the base?
Yes. The snap-off strainer and quick-disconnect design are intended to simplify servicing.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
