SEAFLO 24V 750GPH 06 Series Automatic Bilge Pump Integral Float

Compact automatic bilge pumping with integrated float

The SEAFLO SFBP2-G750-06 is a 24V DC, 750 GPH automatic submersible bilge pump with an integral float switch. It turns on as bilge-water level rises and stops when the water is removed, without requiring a separate external float switch.

The compact all-in-one design suits smaller 24V yachts, motorboats, tenders, fishing craft and auxiliary compartments where 750 GPH nominal capacity is appropriate.

Automatic pump features

• Integrated float switch for automatic water-level operation.
• No separate float switch required for normal automatic use.
• Designed not to activate from straight motor oil alone entering the bilge.
• Snap-off strainer base provides access for cleaning.
• Anti-fouling impeller helps maintain reliable operation.
• One-metre 18 AWG lead for routing to a protected dry connection.
• Compact, fully submersible marine construction.

Technical specification

Boat compatibility and installation checks

• For 24V DC vessels only; do not connect directly to 12V.
• 750 GPH is the nominal open-flow rating. Actual discharge decreases with lift, hose length, bends and restrictions.
• Install upright and level at the lowest practical point, with free float movement and access to the snap-off strainer.
• Use 19 mm smooth-bore reinforced hose and provide anti-siphon protection where required.
• Fit suitable circuit protection and marine-grade wiring for the cable run.
• The oil-resistant activation behaviour is not an oil-removal function; clean oil contamination separately and legally.
• Package: one automatic 06 Series pump with integral float and strainer base. Hose, fuse and through-hull are separate.

Frequently asked questions

Does it need another float switch?

No. The float switch is integrated into the pump body.

Can it be installed on a 12V boat?

No. This is the 24V version.

Will it pump engine oil?

It is a water bilge pump and is designed not to activate from straight motor oil alone. It must not be used as an oil-transfer pump.

Will it deliver 750 GPH through a raised outlet?

No. The nominal rating is measured at open flow; installed flow falls with head and hose resistance.