Pontoon Dock Wheel Fender 300mm Reinforced Nylon Bracket Boat Protection

Rolling protection for dock and pontoon corners

A 300mm rotating dock wheel that helps guide the hull around a corner instead of allowing it to scrape against a fixed edge.

Suitable for private pontoons, marina berths, harbour edges and other low-speed docking positions used by motorboats, yachts, RIBs and fishing boats.

Technical specification

Applications and installation

• Use where a boat regularly approaches or departs close to a pontoon corner.
• Position the wheel at the normal hull contact height and confirm clearance through the expected tidal range.
• Fasteners are not specified as included; use marine-grade fixings appropriate for the dock structure.
• The mounting surface must be structurally sound. Through-bolting and backing plates may be required.
• Inspect the wheel rotation, bracket and fixings periodically, particularly after heavy contact or winter weather.

Important limitations

This is a docking aid, not a substitute for correct boat fenders, mooring lines or safe boat handling. It is intended for low-speed contact and must not be treated as structural protection against high-energy impacts.

Frequently asked questions

Will it fit any pontoon?

It can be fitted to many timber or suitably prepared pontoon corners, but the installer must confirm the fixing surface, edge geometry and required fasteners.

Does the wheel rotate?

Yes. The rolling action lets the hull travel around the corner with less rubbing than a fixed corner fender.

Are mounting bolts included?

Mounting hardware is not stated as included. Select corrosion-resistant fixings for the specific dock structure.

Can it replace the boat's normal fenders?

No. Continue to use correctly positioned boat fenders and secure mooring lines.