Adjustable Inox 316 Outboard Motor Bracket 40kg 20HP 5-Position
90726
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 1 item left
- Backordered, shipping soon
Adjustable auxiliary outboard mounting bracket
Heavy-duty rise-and-fall bracket for mounting a small auxiliary or kicker outboard on a suitable boat transom.
INOX 316 stainless-steel construction and a non-absorbent polypropylene engine pad make it suitable for yachts, motorboats, fishing craft and canal boats exposed to fresh or salt water.
Technical specification
| Maximum engine power | 20HP |
| Maximum engine weight | 40kg (88lb) |
| Bracket material | INOX / AISI 316 stainless steel |
| Engine pad | White polypropylene; non-absorbent and rot resistant |
| Height adjustment | Five selectable positions |
| Mounting type | Bolt-on transom installation |
| Recommended use | Auxiliary and kicker outboards within both the power and weight limits |
Boat and engine suitability
- Suitable for vertical or appropriately prepared transoms on sailing yachts, motorboats, fishing boats and inland-waterway craft.
- The 20HP figure is a maximum power limit; the engine must also weigh no more than 40kg.
- Four-stroke outboards are often heavier than two-strokes of the same horsepower. Always use the actual engine weight.
- Confirm shaft length, propeller immersion, steering clearance and full engine tilt before drilling the transom.
- Not intended to compensate for a weak, damaged or unsuitable transom.
Installation and safety
- Installation should be carried out by a competent marine engineer or boatbuilder.
- Use marine-grade through-bolts, large washers or backing plates appropriate for the transom construction.
- Seal all drilled holes to prevent water ingress into the transom core.
- Check that the bracket locks positively in every working position and that the engine cannot contact the hull.
- Inspect springs, pivots, pad, fasteners and transom structure regularly.
Frequently asked questions
Can I fit a 20HP four-stroke engine?
Only if its actual dry and operating weight remains within the 40kg limit and the boat transom is suitable.
Is the mounting pad made from wood?
No. It uses polypropylene, which does not absorb water or rot like an untreated wooden pad.
Will it fit every boat transom?
No. Transom angle, thickness, strength, available space and required propeller depth must be checked before installation.
Are transom bolts included?
Fixings are not stated as included. Select marine-grade hardware suitable for the boat's transom construction.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
