10ft Multiflex Boat Steering Kit – Outboard up to 150HP – 3.05m Cable
mms3462-10a
- Dispatched in 2-3 days
- 30 Day Return Policy
- In stock, ready to ship
- Backordered, shipping soon
Multiflex 10ft Rotary Steering Kit
Helm, Bezel & 3.05m Cable – Outboards up to 150HP
A complete Multiflex packaged mechanical steering system for single-outboard boats rated up to 150HP. The kit pairs a rotary helm and matching dash bezel with a 10ft (3.05m) SC-16 series push-pull steering cable, giving you everything needed to replace a worn system or fit new steering from the console to the engine tilt tube – no hydraulics, no fluid, no bleeding. Steering wheel not included.
Key Features
- ✔ Complete kit: rotary helm, dash bezel and 10ft cable
- ✔ Simple mechanical design – minimal maintenance
- ✔ Matched Multiflex SC-16 series components
- ✔ Cost-effective replacement or new installation
- ✔ Suits single outboards up to 150HP
Technical Specs
| Brand | Multiflex |
| System | Mechanical rotary |
| Series | SC-16 |
| Cable Length | 10ft / 3.05m |
| Max Engine Rating | 150HP |
| Engines | Single outboard |
| Steering Wheel | Not included |
| SKU | mms3462-10a |
What's in the Box
| Component | Part Number | Qty |
|---|---|---|
| Rotary steering helm | LM-H-101 | 1 |
| Dash bezel | LM-B-1 | 1 |
| Steering cable 10ft / 3.05m | SC-16-10 | 1 |
| Steering wheel | – | Not included |
Compatibility / Fitment Guide
| Engine Setup | Horsepower | Suitability |
|---|---|---|
| Single outboard, standard tilt tube | Up to 150HP | ✔ Suitable |
| Single outboard | Above 150HP | ✘ Not suitable – use hydraulic steering |
| Twin / multiple outboards | Any | ✘ Not suitable |
| Measured cable route | – | Must call for a 10ft cable (see Q&A) |
Part Number Reference
| Multiflex Helm | LM-H-101 |
| Multiflex Bezel | LM-B-1 |
| Multiflex Cable | SC-16-10 (SC-16 series, 10ft) |
| 4Boats SKU | mms3462-10a |
| EAN | 7427248255789 |
Questions & Answers
Is a steering wheel included?
No. The kit contains the helm, bezel and cable. A steering wheel is sold separately – if you need one, choose the version of this kit supplied with a wheel.
How do I choose the right cable length?
Measure from the centre of the helm, along the planned cable route, to the centre of the engine at the transom, then add the allowance given in the steering manufacturer’s guide. Choose the 10ft kit only if your measured route calls for a 10ft cable – a cable that is too short or too long will strain the steering.
Can I use it on an engine above 150HP?
No. This kit is rated for single outboards up to 150HP. Higher-powered engines require hydraulic steering.
Who should install it?
Steering is safety-critical. Installation and a full lock-to-lock function check should be carried out by a competent marine technician.
Note: Please verify engine horsepower, cable length and tilt-tube compatibility before ordering. If in doubt, contact the 4Boats team and we’ll help you confirm the right kit.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.