Lalizas Neptune SOLAS/MED Immersion Suit Universal 160-190cm 70454

Lalizas Neptune SOLAS/MED/MER Insulated Immersion Suit – Universal

Commercial-grade cold-water abandonment suit made from 5 mm reinforced neoprene. Designed to reduce heat loss and water ingress during marine emergencies while allowing rapid donning and essential movement.

Correct Size and Intended User

Both height and weight ranges must be considered. If the intended wearer falls outside either range, select a different Neptune size.

Where It Is Used

• Commercial ships, ferries and passenger or cargo vessels.
• Offshore platforms, wind-farm support operations and workboats.
• Rescue boats, man-overboard boats and emergency response craft.
• Cold-water operations where abandonment may expose crew to hypothermia.

Important: the Neptune immersion suit is designed to be worn together with an approved lifejacket. It does not replace the lifejacket specified for the vessel or operation.

Construction and Safety Features

• 5 mm reinforced neoprene thermal insulation.
• High-visibility red exterior for easier detection.
• Face seal and protective face flap.
• Integral three-finger neoprene gloves for thermal protection with usable grip.
• Front waterproof zip and ankle cuffs designed to limit water ingress.
• Genuine SOLAS retroreflective tape to improve night-time visibility.
• Neoprene storage pocket and buddy-line arrangement.
• Ergonomically tested for emergency movement and rapid donning.

Compliance and Tested Performance

• SOLAS / MED-MER approved insulated immersion-suit specification.
• Thermal-insulation performance tested to the applicable IMO MSC/Circ.980 procedures.
• Tested for water ingress, jumping and leakage.
• Diesel-oil and flame resistance tested for the intended commercial marine environment.
• Designed to be unpacked, donned and secured in less than two minutes by a trained user.
• Specified stowage-temperature range: −30°C to +56°C.

Inspection, Training and Storage

Crew should practise donning in a controlled drill and follow the vessel’s safety-management procedures. Inspect the suit at the interval required by the vessel, flag state and manufacturer instructions, checking the zip, seals, seams, gloves, reflective tape and packaging.

Store dry, accessible and protected from sunlight, chemicals, sharp objects and heat sources. A damaged, contaminated or leaking suit must be removed from service and assessed by a competent service provider.

What’s Included

• One Lalizas Neptune insulated immersion suit in Universal size
• Integral neoprene three-finger gloves
• Manufacturer identification and donning information

Frequently Asked Questions

Is this suit a lifejacket?
No. It is an insulated immersion suit and must be worn with an approved lifejacket as instructed by Lalizas and the applicable vessel regulations.

Is it suitable for leisure boating?
It can be used where its commercial SOLAS/MED specification and size are appropriate, but it is primarily intended for commercial, offshore and professional cold-water emergency equipment.

Are the gloves separate?
No. This version uses integral neoprene three-finger gloves to reduce exposed areas and help retain heat.

How quickly can it be put on?
The design is intended for donning and securing in under two minutes. Regular supervised drills are essential; emergency equipment should never be tried for the first time during an incident.

Can it be repaired with an ordinary neoprene patch?
Repairs and leak testing should follow Lalizas procedures and the vessel’s regulatory requirements. Do not return a damaged commercial survival suit to service without competent inspection.

How do I select the size?
Check both the manufacturer’s height and weight ranges shown above. Protective clothing worn underneath must not prevent closure or safe movement.