Lalizas 4-Step Hook-Over Aluminium Boat Boarding Ladder 110cm

Overview

Lightweight hook-over boarding ladder with four non-slip plastic steps.

Made from marine-grade anodised aluminium tube, the ladder hangs over a suitable transom or gunwale and uses two stand-off feet against the hull. Folding hooks allow flatter storage when the ladder is not in use.

Technical specifications

Applications and compatibility

Suitable for tenders, open motorboats, RIBs with a rigid transom, fishing boats and small cruisers where the hooks and stand-offs can bear safely on a strong structure.

• Measure transom or gunwale thickness against the approximately 22cm hook depth.
• Confirm the 110cm length puts enough steps below the waterline for safe boarding.
• Both stand-off feet must contact a suitable hull surface without loading a fragile panel or tube.
• Check for clearance from outboards, sterndrives, steering gear, trim tabs and sharp edges.

Use, safety and package contents

• Fit the ladder only at a structurally sound boarding point and check stability before use.
• Keep the ladder near vertical with both hooks and both stand-offs fully supported.
• Do not use while the engine is running; keep clear of propellers and propulsion gear.
• Rinse after salt-water use and inspect tube, steps, hooks and feet for damage or looseness.
• Package contains: one four-step ladder with folding hooks and two stand-off feet.

Frequently asked questions

What are the ladder dimensions?

It is approximately 110cm high and 35cm wide, with an approximately 22cm top hook depth.

Does the whole ladder fold?

The top hooks fold flat for storage; the main ladder remains full length.

Will it fit an inflatable RIB tube?

Only where a suitable rigid, load-bearing boarding point is available; do not assume the stand-offs can load an inflatable tube.

How far should it reach below the waterline?

Enough steps must remain submerged for the user to place a foot easily; measure the boat's actual freeboard before ordering.