Multiflex EC-014 Johnson Evinrude OMC Control Cable 24ft
EC-014-24
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 3 items left
- Backordered, shipping soon
Multiflex EC-014 C14 Johnson Evinrude OMC Control Cable
24 ft (7.32 m) | post-1979 OMC/Johnson/Evinrude
A branded Multiflex mechanical engine-control cable for compatible throttle or gear/shift installations. The exact end family, travel and nominal length must all match the control system.
Key Features
- Multiflex standard marine control cable
- Lubricated stainless-steel solid-wire inner
- UV, petrol, oil and marine-fluid-resistant jacket
- 8 in (203 mm) minimum bend radius
- For throttle or shift in the specified cable family
Technical Specs
| Manufacturer | Multiflex |
| Part number | EC-014-24 |
| Nominal length | 24 ft (7.32 m) |
| Quantity | 1 cable |
| Travel | 80 mm |
| Conduit | 7.0 mm |
| Inner | 1.9 mm stainless solid wire |
| Minimum bend radius | 8 in (203 mm) |
| Function | Mechanical throttle or shift |
| 4Boats SKU | EC-014-24 |
Compatibility / Fitment Guide
| Confirmed family | Johnson, Evinrude, BRP and OMC remote controls using the post-1979 C14 / CC205 snap-in connection |
| End fitting check | Compare both ends, attachment hardware and travel with the removed cable or the control/engine parts diagram before ordering. |
| Length | Use a cable stamped 24 ft for like-for-like replacement, or measure the complete routed path and apply the equipment maker’s sizing rule. |
| Routing | Keep every bend at or above 8 in (203 mm); use the largest practical radius, avoid heat/chafe and leave service movement at the engine. |
| Not compatible | Pre-1979 OMC EC-004/C4/CC170, Mercury C5/C36, universal 33C or electronic controls |
Part Number Cross Reference
| Multiflex | EC-014-24 |
| Equivalent family | CC20524 / C1424 |
| Nominal length code | 24 ft / 24 |
| 4Boats SKU | EC-014-24 |
Cross-references identify a family and length only. Verify the precise cable ends, travel and required adaptors.
Frequently Asked Questions
Can it operate throttle or shift?
Yes, where the same cable family is specified. Many installations use two cables.
Will it fit every engine brand named?
No. The remote control, engine end and any adaptors must accept this exact family.
How do I choose the length?
Use the old stamped length where possible; otherwise measure the actual route with the manufacturer’s allowance and round only as directed.
Is this the EDGE version?
No. This is the standard cable range, with an 8 in minimum bend radius.
After installation, with the engine stopped, verify full throttle/idle and forward-neutral-reverse travel without binding and confirm neutral-start/interlock operation.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
