Talamex AISI 316 Drop Nose Pin 10 x 80mm 09.900.129
09.900.129
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 4 items left
- Backordered, shipping soon
Talamex Drop Nose Clevis Pin
10mm diameter x 80mm working length | AISI 316 stainless
A quick-release clevis pin with a locking drop nose for marine deck hardware and other compatible pinned joints. Talamex 09.900.129 is manufactured from AISI 316 stainless steel and is specified as 10mm diameter with an 80mm working length.
Key Features
- Quick-release format: Folding drop nose secures the pin without a loose cotter pin.
- Marine stainless steel: AISI 316 for good corrosion resistance.
- Exact size: 10mm diameter x 80mm working length.
- Reusable deck fitting: Useful for removable or frequently adjusted hardware.
- Positive retention: Nose must be fully rotated into its locked position.
Technical Specs
| Type | Clevis pin with drop nose |
| Pin diameter | 10mm |
| Working length | 80mm |
| Material | AISI 316 stainless steel |
| Finish | Stainless / polished |
| Quantity | 1 |
| 4Boats SKU | 09.900.129 |
Compatibility / Fitment Guide
Dimensional fit: The receiving clevis, tang or bracket must accept a 10mm pin and provide an 80mm working-length requirement without side loading or excessive clearance.
| Typical use | Compatible removable deck fittings, bow rollers, mast-gate hardware and similar clevis joints where the equipment maker specifies this pin size. |
| Excluded without engineering approval | Lifting, fall protection, standing rigging or other safety-critical joints without a published working-load rating and system approval. |
Part Number Cross Reference
| Talamex | 09.900.129 |
| Catalogue format | 09900129 |
| 4Boats SKU | 09.900.129 |
Frequently Asked Questions
Is 80mm the overall length?
Talamex size listings use diameter followed by working length. Confirm against the dimensioned drawing if overall length is critical.
Will it fit any 10mm hole?
Not automatically. Check hole tolerance, clevis width, working length, articulation and load.
Is it suitable for saltwater?
AISI 316 provides good marine corrosion resistance, but the pin should still be rinsed, inspected and kept free-moving.
Can it be used for lifting?
Do not use it as lifting hardware unless the complete application has an appropriate certified working-load rating.
Inspect for bending, wear, cracking and free movement before each use. Replace any damaged pin and ensure the drop nose is fully locked.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
