SEAFLO 12V 1100GPH Low Profile Bilge Pump 14C Non-Automatic

Low-profile bilge drainage for confined spaces

A slim 12V submersible bilge pump designed for shallow, narrow and awkward bilge spaces where a conventional upright pump may not fit. The 14C is non-automatic and must be controlled by a suitable panel switch or external float/water-level switch.

Technical specifications

Applications and compatibility

• For 12V DC motorboats, yachts, RIBs, fishing boats and other craft with limited bilge height.
• Useful beneath engines, cockpit wells or in narrow compartments where low installation height is essential.
• Requires a separate control device; it is not an automatic sensor pump on its own.
• Select capacity using expected water ingress and actual installation head, not the open-flow figure alone.

Installation and package contents

• Mount horizontally at the lowest accessible point and retain access to the snap-fit strainer for cleaning.
• The rotating body and outlet help align the discharge hose without tight bends; confirm clearance before drilling.
• Wire through a correctly rated fuse and marine switch or compatible automatic control, following the manufacturer manual.
• Package contains one SEAFLO 14C pump with strainer/base, check valve, discharge fitting and wiring. Hose, panel switch and external float switch are not stated as included.

Frequently asked questions

Is this pump automatic?

No. The 14C requires a manual panel switch or compatible external float/water-level switch.

Why choose a low-profile pump?

It fits shallow or restricted bilges where a conventional vertical pump cannot be installed correctly.

Can the outlet direction be changed?

Yes. The outlet and pump body can be rotated to suit the hose route.

Will it deliver 1100GPH through a long hose?

Not necessarily. Flow decreases with vertical lift, hose length, bends and restrictions.