Aftermarket Mercury Mariner Fuel Connector 22-13563Q3 8mm Hose
mms-4296
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 1 item left
- Backordered, shipping soon
Mercury / Mariner Engine-End Fuel Connector
8 mm (5/16-inch) Fuel Hose | Replaces 22-13563Q3
Aftermarket female clip-on connector for the engine end of compatible Mercury, Mariner and Force detachable fuel lines. It is supplied under 4Boats SKU mms-4296 as a replacement for Mercury/Quicksilver references 22-13563Q3 and 22-13563A3.
Key Features
- Aftermarket replacement; not genuine Mercury or Quicksilver
- Female clip-on engine-end connector
- For 8 mm (5/16-inch) ID fuel hose
- Mercury / Mariner / Force connector pattern
- Replaces 22-13563Q3 and earlier 22-13563A3 reference
Technical Specs
| Supply type | Aftermarket replacement |
| Connector position | Engine end |
| Connector gender | Female clip-on |
| Fuel hose ID | 8 mm (5/16-inch) |
| 4Boats SKU | mms-4296 |
| Primary OEM reference | 22-13563Q3 |
Compatibility / Fitment Guide
Use this connector only where the engine has the Mercury/Mariner clip-on male fitting and the hose is 8 mm ID. The OEM application information provides the following conditional fitment.
| Mercury / Mariner | Outboards using the clip-on quick-disconnect at the engine end; verify the existing male fitting and parts diagram |
| Force 40 hp and larger | 1993 and newer applications using reference 22-13563Q3/A3 |
| Force 9.9 / 15 / 25 hp | 1998 applications using the referenced clip-on fitting |
| Hose requirement | 5/16-inch (8 mm) inside-diameter marine fuel hose |
| Cross-reference check | Existing connector or parts list should show 22-13563Q3 or 22-13563A3 |
| Examine before fitting | Compare latch, sealing nose and hose-barb arrangement with the removed connector |
Not universal: Not every Mercury/Mariner/Force outboard uses this fitting. Do not fit to a threaded, bayonet or different-generation connector, or to 10 mm ID hose.
Part Number Cross Reference
| Mercury / Quicksilver current reference | 22-13563Q3 |
| Earlier Mercury reference | 22-13563A3 |
| Supplier / 4Boats SKU | mms-4296 |
| Product status | Aftermarket replacement; no OEM packaging claimed |
Cross-reference numbers indicate the intended fit; this item is not represented as a genuine Mercury/Quicksilver component.
Frequently Asked Questions
Is this a genuine Mercury connector?
No. It is an aftermarket replacement for the listed Mercury/Quicksilver references.
Is the hose 10 mm or 8 mm?
The verified OEM application uses 8 mm (5/16-inch) inside-diameter hose. Do not select hose by the barb's outside measurement.
Will it fit all Mercury outboards?
No. The engine must use the clip-on male fitting at the engine end and the matching OEM reference.
Should old hose be reused?
Replace hose that is hardened, swollen, cracked or not fuel-rated, and leak-test the completed assembly.
Prime and inspect the fuel system before starting. Stop immediately if the connector does not latch, seeps fuel or admits air.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
