Fusion 010-12899-10 16 AWG Marine Speaker Cable 15.24m 50ft
233-0101289910
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 2 items left
- Backordered, shipping soon
Fusion 16 AWG Marine Speaker Cable
15.24 m (50 ft) Roll | Fully Tinned Copper
Genuine Fusion marine speaker cable for connecting marine stereos or amplifiers to compatible speakers and subwoofers. The flexible white PVC jacket protects parallel, multi-strand tinned-copper conductors and simplifies routing through conduits and bulkheads.
Key Features
- ✔ Genuine Fusion/Garmin accessory cable
- ✔ 16 AWG marine-grade conductors
- ✔ Multi-strand fully-tinned copper
- ✔ Flexible white PVC outer jacket
- ✔ Oil resistant and VW-1 flame-retardant
Technical Specs
| Fusion part number | 010-12899-10 |
| Length | 15.24 m / 50 ft |
| Conductor size | 16 AWG; approx. 1.3–1.5 mm² |
| Temperature rating | 105°C dry / 90°C wet |
| Maximum voltage rating | 600 V |
| Jacket / construction | White PVC; parallel multi-strand tinned copper |
| Warranty | 1 year |
Compatibility / Fitment Guide
| Application | Suitable when | Check before installation |
|---|---|---|
| Marine speakers | Stereo/amplifier instructions permit 16 AWG cable | Confirm speaker impedance, power and total run length. |
| Marine subwoofers | 16 AWG is adequate for the specified load/run | Higher-current or long runs may require a larger gauge. |
| Fusion Apollo speakers | Fusion installation guidance calls for 16 AWG or larger fully-tinned copper | LED lighting requires separate control/power conductors. |
| Multiple speaker runs | The 15.24 m roll provides enough cable after route planning | Do not daisy-chain loads unless the amplifier supports the resulting impedance. |
For longer runs or low-impedance/high-power loads, calculate voltage drop and use a larger conductor where required. Keep audio cable separate from high-current DC wiring and ignition sources where practical.
Part Number Cross Reference
| Fusion / Garmin | 010-12899-10 |
| 4Boats SKU | 233-0101289910 |
| Length designation | 50 ft / 15.24 m roll |
Frequently Asked Questions
Is this two-conductor speaker cable?
Yes. It uses parallel conductors for the positive and negative audio connection.
Can it power the speaker LEDs?
The audio cable connects the speaker signal. CRGBW lighting requires the separate conductors specified by the speaker wiring diagram.
Is it bare copper?
The multi-strand copper conductors are tinned for marine corrosion resistance.
Is 16 AWG suitable for every 15 m run?
No. The required gauge depends on impedance, power and the complete circuit length; use a larger conductor where calculations or the manual require it.
Plan the route and measure the complete two-way cable path before cutting.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
