Railblaza Kayak Trolling Motor Mount Up to 60lb 04-4091-11
890-04409111
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 2 items left
- Backordered, shipping soon
Railblaza Kayak Trolling Motor Mount
Quick-release bracket for electric motors up to 60 lb thrust
The Railblaza Kayak Motor Mount provides a removable motor-mounting crossbar for a structurally suitable kayak. Once the two supplied StarPort HD bases have been correctly installed, the bracket clips in and out quickly so the kayak can change between paddle-only and motor-ready configurations without leaving a permanent crossbar across the deck.
Key Features
- Quick-release bracket clips into two StarPort HD bases
- Rated for compatible electric trolling motors up to 60 lb thrust
- Marine-grade aluminium crossbar with high-impact polymer components
- RailMount 32-41 fittings allow compatible Railblaza accessories on the tube
- Supplied as a mounting kit with bases, adaptors and stainless-steel hardware
- Bracket removes to restore a clear deck when the motor is not required
Technical Specs
| Motor type | Electric trolling motor |
| Maximum thrust | 60 lb |
| Overall length | Approx. 980 mm |
| Product weight | 4.57 lb / approx. 2.07 kg |
| Primary construction | Marine-grade aluminium and impact-resistant polymer |
| Manufacturer part | 04-4091-11 |
| 4Boats SKU | 890-04409111 |
Compatibility / Fitment Guide
This is a universal installation kit, not a model-specific kayak bracket. Fitment depends on the kayak structure, available mounting area and the motor specification.
| Compatible motor | Transom-clamp electric trolling motor rated at no more than 60 lb thrust, with a clamp that can seat securely on the supplied motor plate. |
| Compatible craft | Kayaks with two strong, accessible mounting areas that can accept the supplied StarPort HD bases and through-fastening or another installation method approved for the hull. |
| Positioning check | Confirm the crossbar can span the chosen position, the motor shaft and propeller clear the hull, and steering/tilting can operate without striking the kayak, seat, rudder or cargo. |
| Load check | The hull and fixing points must withstand motor weight, thrust, vibration and impact loads. Reinforcement or backing plates may be required depending on hull construction. |
| Not verified for | Petrol outboards, electric motors above 60 lb thrust, inflatable craft without a rigid reinforced mounting area, or installations that rely only on thin unsupported deck material. |
Before ordering: measure the proposed mounting location and motor clamp, inspect access beneath the deck, and consult the kayak manufacturer if the permitted motor load or mounting method is unknown.
Part Number Cross Reference
| Railblaza part number | 04-4091-11 |
| 4Boats / supplier SKU | 890-04409111 |
| Mounting system | Railblaza StarPort HD |
Frequently Asked Questions
Will it fit any kayak?
No. The kayak must have suitable structural mounting areas, enough span and clearance, and an approved method of fastening the StarPort HD bases.
Can I use a petrol outboard?
Current Railblaza product information specifies electric trolling motors up to 60 lb thrust. This listing does not claim petrol-outboard compatibility.
Are the deck bases included?
Yes. The kit includes two StarPort HD bases, two RailMount 32-41 fittings, two male-to-male adaptors and stainless-steel mounting hardware.
Can the bracket stay off the kayak?
Yes. After the bases are installed, the bracket can be clipped in for use and removed when a clear deck is preferred.
Does 60 lb refer to motor weight?
No. It is the motor's thrust rating. You must separately confirm that the kayak and installation can safely carry the actual motor and battery weight.
Measure the installation area and verify the kayak manufacturer's permitted motor load before purchase. Motor, battery and installation tools are not included.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
