38100-99E01-0ED POWER TRIM MOTOR FOR SUZUKI OUTBOARD DT115 DT140 '96-'00 38100-99E01-0ED PTT - 4Boats
38100-99E01-0ED POWER TRIM MOTOR FOR SUZUKI OUTBOARD DT115 DT140 '96-'00 38100-99E01-0ED PTT - 4Boats
38100-99E01-0ED POWER TRIM MOTOR FOR SUZUKI OUTBOARD DT115 DT140 '96-'00 38100-99E01-0ED PTT - 4Boats
38100-99E01-0ED POWER TRIM MOTOR FOR SUZUKI OUTBOARD DT115 DT140 '96-'00 38100-99E01-0ED PTT - 4Boats
38100-99E01-0ED POWER TRIM MOTOR FOR SUZUKI OUTBOARD DT115 DT140 '96-'00 38100-99E01-0ED PTT - 4Boats
38100-99E01-0ED POWER TRIM MOTOR FOR SUZUKI OUTBOARD DT115 DT140 '96-'00 38100-99E01-0ED PTT - 4Boats
38100-99E01-0ED POWER TRIM MOTOR FOR SUZUKI OUTBOARD DT115 DT140 '96-'00 38100-99E01-0ED PTT - 4Boats
Suzuki DT115 DT140 Power Trim Tilt Motor 12V 2-Bolt 1996-2001
Suzuki DT115 DT140 Power Trim Tilt Motor 12V 2-Bolt 1996-2001
Suzuki DT115 DT140 Power Trim Tilt Motor 12V 2-Bolt 1996-2001
Suzuki DT115 DT140 Power Trim Tilt Motor 12V 2-Bolt 1996-2001
Suzuki DT115 DT140 Power Trim Tilt Motor 12V 2-Bolt 1996-2001

Suzuki DT115 DT140 Power Trim Tilt Motor 12V 2-Bolt 1996-2001

38100-99E01-0a

  • Dispatched in 2-3 days
  • 30 Day Return Policy
  • In stock, ready to ship
  • Backordered, shipping soon
Our stock levels are dynamic and can change frequently. If a product appears to be in stock, it may have already sold out. Please contact us if you have any questions about availability. Thank you for your understanding.

Regular price£199.00
/
Tax included.

Power trim motor for selected Suzuki DT115 and DT140 outboards

A reversible 12V two-wire replacement motor for selected Suzuki hydraulic trim/tilt systems. This version has a two-bolt flange and keyed drive shaft for compatible DT115 and DT140 two-stroke installations.

Best used for: restoring trim and tilt operation on compatible RIBs, fishing boats, sports boats and workboats powered by Suzuki DT-series two-stroke outboards.

Technical specification

Supply voltage 12V DC
Motor operation Reversible for trim up/down
Wiring Two wire, blue/green
Mounting flange Two bolt
Drive shaft Keyed/tang drive; must match original
Primary engine type Suzuki two-stroke outboard
Seal Correct O-ring required at motor/pump interface

Engine compatibility and trim-unit checks

  • Suzuki DT115 and DT140 two-stroke: selected 1996-2001 applications using the listed 99E-series two-bolt trim motor.
  • Selected DT65, DT75 and DT85 applications may use a related configuration; confirm OEM number, flange and shaft before purchase.
  • Selected early Suzuki DF60/DF70 applications may use related references, but four-stroke model name alone does not confirm the two-bolt unit.
  • Not interchangeable with visually similar four-bolt motors.

Compatibility rule: match the original OEM reference, 12V two-wire system, bolt count and spacing, shaft/tang, connector style and trim-pump manufacturer. Engine model or appearance alone is not sufficient.

OEM references, fitting and package

  • Suzuki: 38100-99E01, 38100-99E01-0ED and confirmed supersessions for the same two-bolt trim assembly.
  • Suzuki related reference: 38100-95E01-0ED only where the original unit and flange are identical.
  • Johnson/OMC: 5030828, 5030829, 5030830, 5031166 where fitted to the same Suzuki-built trim unit.
  • Sierra Marine: 18-6837; API Marine: PT657NM.

Before fitting: support the outboard safely, isolate the battery, lower system pressure as instructed by the manufacturer and compare the old motor, flange, shaft and wiring with the replacement.

Installation: inspect the hydraulic fluid and mating surface, use the correct seal and manufacturer torque values, then bleed and test the trim system through its full travel. Professional marine installation is recommended.

Package contents: one new replacement trim/tilt motor. Reuse or replace seals, fasteners and hydraulic fluid according to the service manual; only parts explicitly shown and stated are included.

Frequently asked questions

Is this the two-bolt or four-bolt version?

This listing is for the compatible two-bolt version. Verify the original flange before ordering.

Does it fit every Suzuki DT115 or DT140?

No. Confirm model year/serial, original reference, two-bolt flange, shaft and wiring.

Can a similar four-bolt motor be substituted?

No. Bolt pattern and pump engagement must match exactly; do not modify the trim manifold.

What else should be inspected during replacement?

Check hydraulic fluid condition, pump engagement, corrosion, relays, cable voltage drop and the sealing surface.

Important: OEM names and numbers are compatibility references only. This is a replacement component unless expressly described as genuine OEM.

For the products under £150 the shipping is £6.99.

Free delivery for most items over £150.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed

Why choose us

Quality marine parts and boat equipment from 4Boats UK

QUALITY MARINE PARTS

We source dependable marine products from established suppliers and continually refine our range using customer feedback.

Untitled_1080_x_1080_px_2 - 4Boats

TRUSTED SUPPLIERS

We work with trusted marine suppliers and distribution partners to provide reliable parts, equipment and fulfilment.

Simple_Image_Play_Built_into_Routine_Cosmetics_TikTok_In-Feed_Ad_1080_x_1080_px_10 - 4Boats

PERSONAL SERVICE

Every order is checked by the 4Boats team. Contact us before ordering if you need help with part numbers, compatibility or availability.