Talamex AISI 316 Stainless Boat Grab Rail 200 300 500 800mm
72.135.280
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 4 items left
- Backordered, shipping soon
Talamex polished AISI 316 stainless-steel grab rail
A 22mm-diameter marine hand rail with welded mounting feet and approximately 75mm stand-off. Four lengths allow selection for hatches, cabin sides, consoles and deck structures.
Suitable for: providing an additional handhold on suitably reinforced GRP, timber or metal surfaces aboard leisure and work boats.
Technical specification and variants
| Material | AISI 316 / A4 stainless steel |
| Finish | Polished |
| Tube diameter | Approximately 22mm |
| Stand-off height | Approximately 75mm |
| Available lengths | 200mm, 300mm, 500mm and 800mm |
| Mounting | Welded foot plates; through-bolting recommended |
| Orientation | Horizontal or vertical where structure permits |
| Fasteners | Not included unless explicitly shown |
Selection and compatibility
- Select the required overall length from the variant selector and verify mounting-foot centres from the product drawing/item.
- The deck, hatch or bulkhead must be reinforced for the expected dynamic load of a moving person.
- Do not treat the word marine as proof that every thin panel is strong enough.
- Provide backing plates or large washers on GRP/timber where required.
- Not certified for fall arrest, lifting, towing or attaching safety harnesses.
Installation, use and care
- Through-bolt with compatible A4 stainless fasteners wherever possible.
- Seal every deck penetration and protect exposed core material from water ingress.
- Isolate stainless steel from aluminium or carbon structures to reduce galvanic corrosion.
- Position where the hand can grip without trapping fingers or striking controls.
- Rinse salt away and inspect welds, fasteners and sealant regularly.
Package contents: one Talamex grab rail in the selected 200, 300, 500 or 800mm length.
Frequently asked questions
Which length will I receive?
Only the length selected in the product options.
Are the rails AISI 316?
Yes, the stated material is AISI 316/A4 stainless steel.
Can it be screwed into a thin GRP hatch?
Not safely without adequate reinforcement. Through-bolting and backing are normally preferred.
Can it be used as a lifting handle?
It is a grab rail, not certified lifting or fall-arrest hardware.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.