B&G Triton2 NMEA 2000 Autopilot Controller 000-13296-001
000-13296-001
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 1 item left
- Backordered, shipping soon
B&G Triton² Autopilot Controller
Dedicated Seven-Key Sail-Pilot Control | NMEA 2000 / Micro-C
The B&G Triton² Pilot Controller is a dedicated keypad for compatible B&G sailing-autopilot systems. It provides standby/auto control, course changes and sailing manoeuvre commands while pilot status and menus are shown on a compatible Triton² display or multifunction display.
Key Features
- ✔ Seven-key sailing-specific pilot interface
- ✔ Smart Manoeuvre tack control on compatible systems
- ✔ Compass-heading and wind-angle steering commands
- ✔ Low-profile installation, approximately 8mm proud
- ✔ NMEA 2000 Micro-C connection and approximately 150mA consumption
Technical Specs
| B&G part number | 000-13296-001 |
| Network | NMEA 2000 / Micro-C |
| Supply | 9–16V DC from NMEA 2000 network |
| Current draw | Approx. 150mA |
| Ingress protection | IPX7 |
| Operating temperature | −25°C to +65°C |
| Storage temperature | −40°C to +85°C |
| Included network parts | 2ft NMEA 2000 drop cable and T-connector |
| Also included | Sun cover, mounting template and screws |
Compatibility / Fitment Guide
| Check | Required specification | Decision |
|---|---|---|
| Network | Powered, correctly terminated NMEA 2000 backbone | Connect with the supplied Micro-C drop cable and T-piece; it is not Ethernet or NMEA 0183. |
| Pilot computer | Compatible B&G/Simrad sailing autopilot computer such as a correctly specified NAC system | Controller sends commands over the network; it does not replace the pilot computer. |
| Display | Compatible Triton² or B&G multifunction display capable of showing pilot state | The keypad has no navigation display of its own. |
| Drive sizing | Drive, computer and feedback configuration selected for the vessel | Boat-length examples for pilot packs do not make the controller itself a complete sized system. |
| Mounting | Accessible helm position with IPX7 installation and rear cable clearance | Follow the template and protect the rear/network connection. |
Not suitable for: stand-alone use, direct connection to a steering ram or pump, NMEA 0183-only networks, or systems without a compatible pilot computer and heading data.
Part Number Cross Reference
| Manufacturer | B&G |
| Manufacturer part number | 000-13296-001 |
| Included cable | N2KEXT-2RD / 000-0119-88 |
| Included T-connector | N2K-T-RD / 000-0119-79 |
| Included sun cover | 000-13725-001 |
Frequently Asked Questions
Will this operate an autopilot by itself?
No. It is a network controller and requires the rest of a compatible autopilot system.
Does it connect to NMEA 0183?
No. Its physical/data interface is NMEA 2000 Micro-C.
Do I need a display?
Yes. Use a compatible Triton² or B&G multifunction display for status and configuration.
Is a drive unit included?
No. Pilot computer, compass/heading sensor, rudder feedback where required and steering drive are separate.
Before ordering: Verify the complete autopilot architecture, NMEA 2000 power budget, pilot-computer compatibility and drive sizing.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
