Multiflex EEC-005 Mercury MerCruiser Gen I Control Cable 9ft
EEC-005-09
- Dispatched in 2-3 days
- 30 Day Return Policy
- In stock, ready to ship
- Backordered, shipping soon
Multiflex EEC-005 EDGE Mercury MerCruiser Gen I Control Cable
9 ft (2.74 m) | Mercury / MerCruiser Gen I 600A
A branded Multiflex mechanical engine-control cable for compatible throttle or gear/shift installations. The exact end family, travel and nominal length must all match the control system.
Key Features
- Low-friction EDGE conduit and coated inner
- 4 in minimum bend-radius capability
- Reduced operating effort and backlash
- Lifetime-lubricated polyurethane wiper seals
- For throttle or shift in the specified cable family
Technical Specs
| Manufacturer | Multiflex |
| Part number | EEC-005-09 |
| Nominal length | 9 ft (2.74 m) |
| Quantity | 1 cable |
| Travel | 97 mm |
| Conduit | 8.6 mm EDGE |
| Inner | 2.75 mm coated inner |
| Minimum bend radius | 4 in (102 mm) |
| Function | Mechanical throttle or shift |
| 4Boats SKU | EEC-005-09 |
Compatibility / Fitment Guide
| Confirmed family | Mercury, Mariner and MerCruiser mechanical controls using the 600A / C5 / CCX179 Gen I end pattern |
| End fitting check | Compare both ends, attachment hardware and travel with the removed cable or the control/engine parts diagram before ordering. |
| Length | Use a cable stamped 9 ft for like-for-like replacement, or measure the complete routed path and apply the equipment maker’s sizing rule. |
| Routing | Keep every bend at or above 4 in (102 mm); use the largest practical radius, avoid heat/chafe and leave service movement at the engine. |
| Not compatible | Gen II EEC-036/MACH36/CCX189, Mariner C16, universal 33C or electronic controls |
Part Number Cross Reference
| Multiflex | EEC-005-09 |
| Equivalent family | CCX17909 / MACH509 |
| Nominal length code | 9 ft / 09 |
| 4Boats SKU | EEC-005-09 |
Cross-references identify a family and length only. Verify the precise cable ends, travel and required adaptors.
Frequently Asked Questions
Can it operate throttle or shift?
Yes, where the same cable family is specified. Many installations use two cables.
Will it fit every engine brand named?
No. The remote control, engine end and any adaptors must accept this exact family.
How do I choose the length?
Use the old stamped length where possible; otherwise measure the actual route with the manufacturer’s allowance and round only as directed.
Why choose EDGE?
EDGE uses a coated inner, low-friction conduit and 4 in minimum bend radius to reduce effort in demanding routes.
After installation, with the engine stopped, verify full throttle/idle and forward-neutral-reverse travel without binding and confirm neutral-start/interlock operation.
For the products under £150 the shipping is £6.99.
Free delivery for most items over £150.
