10ft 2x Multiflex EC-014 C14 Type Cables Johnson Evinrude OMC Gear Throttle 79+

10ft Multiflex EC-014 C14 control cable pair

Branded Multiflex replacement control cables for Johnson, Evinrude and OMC remote-control systems from 1979 onwards. The EC-014 is the Multiflex standard cable equivalent to C14 and SeaStar/Morse CC205. This listing supplies two identical cables, normally used as one throttle cable and one gear-shift cable.

Compatibility

• Johnson, Evinrude, BRP and OMC controls using the post-1979 C14/CC205 snap-in style connection
• Not suitable for pre-1979 OMC controls, which normally require Multiflex EC-004, C4, CC170 or 400A-type cables
• Check the connector ends and the length marking on the existing cable before ordering; engine horsepower alone does not identify the correct cable

Official Multiflex specifications

• Manufacturer: Multiflex
• Model: EC-014-10 standard control cable
• Equivalent types: C14 / CC205 / 400 Type
• Nominal length: 10ft (3.05m)
• Travel: 80mm
• Conduit: 7.0mm
• Inner: 1.9mm stainless-steel solid wire
• Minimum bend radius: 8 inches; keep bends as large and gentle as the installation permits
• Outer jacket: black, with resistance to UV, petrol, fluids and common marine chemicals
• Application: mechanical throttle and gear-shift control
• Quantity: 2 cables

Cross-reference guide

• Multiflex: EC-014-10
• SeaStar / Morse / Teleflex type: CC20510
• Ultraflex type: C14-10 / C14X10

Cross-references identify the cable family and length. Always compare the end fittings with the cable being replaced.

How to choose the correct length

Use the length printed on the old cable where possible. If measuring the route, follow the actual path from the remote control to the engine and allow for bends and steering movement. Do not measure in a straight line.

FAQ

Will this fit every Johnson or Evinrude engine?
No. It fits remote controls using the C14/CC205 post-1979 connection. Confirm the end fittings on the existing cable.

Does the pair include both throttle and gear cables?
Yes. The package contains two identical cables, normally installed as one throttle cable and one gear-shift cable.

Is this a genuine Johnson or Evinrude part?
No. It is a branded Multiflex EC-014 aftermarket replacement in the C14/CC205 family.

Is this the low-friction Multiflex EDGE cable?
No. This is the standard EC-014 cable with an 8-inch minimum bend radius. The EDGE version is EEC-014 and is a different product.