Multiflex EC-033 10ft 33C control cable
Manufactured by Multiflex, this EC-033 standard 33C/3300 push-pull control cable (C2 type equivalent) is 10ft (3.05m) long. One cable is supplied and it can be used for either the throttle or gear/shift function in a compatible remote-control system.
The EC-033 is Multiflex's standard universal 3300-series cable: a dependable branded alternative for installations that use Morse 33C-type cables. Its black marine jacket and corrosion-resistant construction are designed for normal outboard, inboard and sterndrive control-cable routing.
Compatibility
Suitable for Yamaha, Suzuki, Honda, Tohatsu, Nissan, Selva and Force installations where the remote control and engine connection accept a universal 33C/3300 cable with 10-32 UNF ends. The correct engine or control-box adaptors may be required.
Please check before ordering: this is not a dedicated Mercury/Mariner Gen I or Gen II cable and it is not a Johnson/Evinrude C14 cable. Match the cable type, end threads and length to the cable being replaced.
Technical specification
| Brand |
Multiflex |
| Model |
EC-033 standard / universal 3300 / C2 type equivalent |
| Length |
10ft (3.05m) per cable |
| Travel |
90mm |
| End thread |
10-32 UNF |
| Conduit diameter |
8.0mm |
| Inner wire |
1.9mm stainless-steel solid wire |
| Minimum bend radius |
8in (203mm) |
| Jacket colour |
Black |
| Quantity |
1 cable |
What is included?
- 1 × Multiflex EC-033 10ft control cable
- Control-box and engine adaptors are not included unless shown separately in the product images.
How to choose the correct length
For an existing installation, read the length marking on the old cable where possible. Otherwise measure the cable from end to end along its full route and round up to the next whole foot. For a new installation, measure the intended route without sharp bends and allow a service loop at the outboard.
Frequently asked questions
Which outboard brands are compatible?
Multiflex specifies EC-033 for compatible Yamaha, Suzuki, Honda, Tohatsu, Nissan, Selva and Force installations. The control system must accept a universal 33C/3300 cable with 10-32 UNF ends and the appropriate connection hardware.
What does 33C/3300 or C2 Type mean?
33C and 3300 describe the common push-pull control-cable format. C2 Type is another widely used market description for this connection style. EC-033 is Multiflex's standard universal cable in this format.
Is EC-033 the same as Multiflex EDGE?
No. This listing is for the standard Multiflex EC-033 cable. Multiflex EDGE is the separate premium low-friction range.
Do I need one cable or two?
Many remote controls use one cable for throttle and a second for gear selection. Buy two single cables or choose a pair listing when both functions need replacing.
