Victron BatteryProtect 65A 12V/24V battery over discharge protector BP-65

The Victron BatteryProtect 65A is an advanced battery management device designed to safeguard your battery system from excessive discharge, thereby prolonging battery life and ensuring the protection of connected appliances. Compatible with 12V and 24V systems, this automatic protector intelligently disconnects non-essential loads before the battery becomes too depleted, preventing deep discharges that can harm battery health.

Key Features:

• Low Voltage Disconnect:
  • Automatically disconnects the battery from non-critical loads when voltage drops below a preset threshold, preventing deep discharge.
• Programmable Voltage Thresholds:
  • Easily customize the disconnect and reconnect voltage levels to suit your specific needs and battery type.
• Overvoltage Protection:
  • Disconnects loads when the battery voltage is too high, protecting sensitive devices from potential damage.
• Automatic Voltage Recognition:
  • Detects whether your system is 12V or 24V upon startup for hassle-free installation and setup.
• Ultra-Low Power Consumption:
  • Minimal current draw ensures that the BatteryProtect does not significantly drain your battery, especially important after low voltage disconnect.
• Remote Control Capability:
  • Features input and output connections for remote switching, allowing manual control over load connection and integration with alarm systems.
• Lithium Battery Compatibility:
  • Specialized modes support VE.Bus BMS (Battery Management System) for lithium batteries, enabling charge interruption when necessary.

Technical Specifications:

• Nominal Battery Voltage: 12V / 24V
• Operating Voltage Range: 6V – 35V
• Maximum Continuous Load Current: 65A
• Peak Current (30 seconds): 250A
• Power Consumption:
  • When On: <1.5 mA
  • When Off or Disconnected: <0.6 mA
• Alarm Relay Output: 50 mA (normally open)
• Operating Temperature Range: -40°C to +40°C (de-rated capacity up to 60°C)
• Dimensions: 106 x 48 x 40 mm
• Weight: 200 grams

Included Components:

• Negative Cable: 50 cm length with a 1.5 mm² cross-section for easy connection.
• Connectors:
  • 2-pin dry-contact socket for remote switch connection.
  • 3-pin dry-contact socket for negative cable, alarm output, and programming input.

Installation Notes:

• Positive Line Installation:
  • The BatteryProtect should be installed on the positive (+) battery cable, close to the battery terminal.
• One-Way Current Flow:
  • Designed for unidirectional current flow. It should not be placed between the battery and the battery charger, except in specific configurations as outlined in the user manual.
• Remote Control and Alarms:
  • Utilize the remote switch terminals to connect to external control systems or manual switches.
  • Alarm output can be connected to signal devices to alert when the battery is disconnected due to low voltage.

Safety and Compliance:

• Protects Appliances:
  • Prevents damage to connected devices by avoiding operation under low voltage conditions.
• Battery Health Preservation:
  • Extends battery life by preventing deep discharges that can reduce battery capacity and longevity.

Compatibility:

• Battery Types:
  • Suitable for Lead-Acid, AGM, Gel, and Lithium batteries.
• System Voltages:
  • Automatically detects and adapts to 12V or 24V systems.

Warranty:

• Manufacturer Warranty:
  • Backed by a 5-year limited warranty for peace of mind and assurance of quality.

Additional Resources:

• User Manual:
  • A comprehensive user manual is included, providing detailed instructions on installation, programming, and operation.
• Technical Support:
  • Free technical support is available via email or phone to assist with any questions or installation guidance.
• Instructional Videos:
  • How to Use the BatteryProtect
  • Programming the BatteryProtect Settings

Why Choose the Victron BatteryProtect 65A:

• Reliable Protection:
  • Ensures your battery and appliances are safeguarded against improper voltage conditions.
• Customizable Settings:
  • Tailor the device to match your specific power management needs.
• Ease of Use:
  • Simple installation with automatic system voltage recognition and user-friendly programming.
• Energy Efficiency:
  • Ultra-low power consumption minimizes impact on your battery system.

Order Yours Today:

Invest in the Victron BatteryProtect 65A to enhance the longevity of your battery system and protect your valuable equipment from the risks of over-discharge and overvoltage conditions.

For More Information:

• Contact Us:
  • If you have any questions or need assistance, please reach out to our support team via email or phone.
• Documentation:
  • User Manual Download
  • Product Datasheet Download
  • Dimension Diagram Download

Note: Always refer to the user manual for detailed installation instructions and safety guidelines. Ensure that the BatteryProtect is installed by a qualified professional if you are unsure about the process.