25W Off-Grid Solar Lighting System with 4 LED Lights, Solar Panel and Battery

25W Solar Lighting System with Control Unit and 4 LED Lamps

This compact solar lighting system is the perfect off-grid solution for lighting up outhouses, sheds, garages, stables, farms, yurts, or for camping, travel, and other outdoor adventures. Designed for areas without access to mains electricity, it’s a self-contained system powered entirely by sunlight.

During daylight hours, the included 25W solar panel charges a built-in 12V, 12Ah battery inside the control unit. The stored energy can then power up to four 5W 12V LED lights, which plug directly into the front of the control unit. A standard 5V USB socket is also available to charge mobile phones or USB-compatible devices.

The intelligent control unit includes an integrated solar charge controller that manages the battery safely and efficiently. It protects against overcharging, ensuring long-lasting, reliable use. With just 4–5 hours of bright sunlight, the solar panel can fully charge the battery (charging time may be longer in cloudy conditions). Once charged, the battery can power all four LED lights for approximately 6–7 hours — and longer if fewer lights are used.

Key Features:

• Ideal for off-grid lighting in sheds, barns, camping or remote locations

• 4x 5W LED lamps with individual On/Off switches

• 25W polycrystalline solar panel with 10m cable

• Control unit includes a 12Ah sealed battery and 5V USB output

• Simple plug-and-play setup with all required connectors

• USB output suitable for phone/device charging

• Overcharge protection via built-in solar controller

• 1-year manufacturer warranty

Specifications:

• System voltage: 12V

• Battery capacity: 12Ah

• LED light power: 5W each

• LED cable length: 5m (each)

• USB output: 5V / 0.8A

• Max DC output current: 3A

• Control unit size: 220 x 130 x 150 mm

• Solar panel size: 510 x 350 x 20 mm

• Control unit weight: 6.86 kg

• Solar panel weight: 2.35 kg

Installation:
Connect the solar panel to the control unit using the included 10m cable. Plug in the LED lights to the four 12V sockets on the control unit. Turn the switch to ON, and the system is ready to charge and power your lights. Each light features its own On/Off switch for flexible control.