Bluetooth Module For Monitoring And Programming A Solar Charge Controller Through The Mobile App (Includes 1.9m Cable)

Bluetooth Module For Monitoring And Programming A Solar Charge Controller Through The Mobile App (Includes 1.9m Cable)

?ÿ

This Bluetooth module plugs into your solar charge controller to allow the controller to communicate wirelessly with your personal mobile device. Then, using your mobile phone with?ÿthe free?ÿpairing app, you can connect wirelessly to this bluetooth module to?ÿmonitor parameters of?ÿthe solar charge controller?ÿ(Tracer?ÿTR/?ÿPTR?ÿseries,?ÿVS****BN,?ÿDM?ÿand?ÿMSC?ÿseries controllers only).?ÿThe pairing app?ÿcan also be used?ÿto change charging and load settings of your solar system.

The app is available to download for iOS devices?ÿhere, and for Android devices?ÿhere.

The mobile app allows you to have?ÿfull control?ÿover the charging process, and?ÿcan display various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge etc. It can also?ÿstore accumulated?ÿcharge and?ÿdischarge energy,?ÿas well as min / max voltage readings.

By adding this Bluetooth module?ÿto your solar charge controller, you will also unlock a range of?ÿexclusive settings?ÿon the mobile app which give you far greater control over your solar system. With access to this vast range of charging parameters, you will be able to:

- Amend the battery type and capacity
- Select charging volts for different charging stages
- Specify the duration of each charging stage
- Create a user-defined battery type with charging parameters specific to your battery (if the pre-existing options are unsuitable)
-?ÿPersonalise the 'load' settings - e.g. set timers for lighting, fans, pumps

LED indicators on the unit also?ÿshow power and network status. This unit also has incredibly low power consumption.

This Bluetooth module has a communication radius of up to 10 metres and comes fully equipped with?ÿ1.9m of cable with RJ45 connectors?ÿ(this can be replaced with a shorter or longer connection cable of your own). Please note, for controllers with a RS485 port, an additional?ÿRS485 to RJ45 cable?ÿwill be required for connection. Please note:?ÿthis Bluetooth module is not suitable for dual battery solar charge controllers.

Bluetooth Module Specifications:

• Communication radius of up to 10m
• Compatible with?ÿTR,?ÿPTR,?ÿVS****BN, LS**24B?ÿand?ÿPU?ÿseries controllers
• Cable length: 1.9m
• Connection: RJ45
• Power consumption: 5V @ 30mA
• Port baud rate: 2400bps-115200bps (default 115200bps)
• Enclosure: IP30
• Dimensions: 51 x 67 x 24.5mm
• Weight: 37.9g
• Mounting holes for ease of installation

The following document(s) are available to download:

User Manual for Photonic Universe Bluetooth module for solar charge controller monitoring & programming (EBOX-BT)