160W 12V solar charging kit with 20A controller and 5m cable

160W 12V solar charging kit with 20A controller and 5m cable

This kit includes:

• 160W monocrystalline solar panel with 5m of solar cable and MC4 connectors
• Advanced 20A solar charge controller

160W solar panel:

The waterproof,?ÿhigh efficiency 160W monocrystalline solar panel included in this kit is perfect for permanent outdoor use to provide free electricity to charge a 12V battery?ÿto power hundreds of devices and electrical appliances.

The long-lasting monocrystalline solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that?ÿthe panel can be used in all weather conditions.

The panel comes with 5m of special solar cable which can operate at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to the 20A solar charge controller(MC4 connectors can also be cut off when wiring to screw terminals of a solar charge controller).

Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.

20A solar charge controller:

The kit includes a 20A solar charge controller designed to protect batteries whilst charging them, having automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.

This solar controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a?ÿload "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 14x7cm.

This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below)

The solar charge controller also features advanced communication technology, which?ÿoffers the user the opportunity?ÿto monitor and program parameters for the controller through various methods:

1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings

2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust?ÿcharging?ÿparameters and controller settings?ÿthrough a free mobile app - Solar Station?ÿMonitor?ÿ(available for Android and iOS users).

3) An RJ45 to USB cable?ÿcan be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor?ÿ(Windows-based PCs and laptops only).

Using one of these communication methods,?ÿthe user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated?ÿcharge and?ÿdischarge energy,?ÿmin/max voltage and other information.?ÿIf required the user will also be able?ÿto?ÿamend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage,?ÿcreate a user-defined battery type with charging parameters specific to?ÿtheir battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.

In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ?ÿ ?ÿ

The controller is not waterproof and should be used indoors.

Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.

Click on the Details and Specifications tab for more information about this product.

Solar panel specifications:

• Peak power: 160W
• Maximum power voltage: 18.8V
• Maximum power current: 8.48A
• Open circuit voltage: 22.9V
• Short circuit current: 9.02A
• Power allowance range: 0~+3%
• Dimensions: 1480 x 670 x 35 mm
• Weight: 12 kg
• 4 mounting holes
• 5m of special solar cable with MC4 connectors attached

Charge controller specifications:

• Rated current 20A
• Fully automated operation and auto 12/24V selection
• Wide solar input voltage range up to 50V
• 3 pairs of terminals (input, battery, output)
• LEDs to indicate charging, battery and load
• Temperature sensor for automatic compensation (-3mV/?øC/2V)
• Over load protection (ƒ?�1.05 times the rated discharge current)
• Short circuit protection (ƒ?�2 times the rated discharge current)
• Over charge / discharge, overheating and other protection features
• Self-consumption:?ÿƒ?? 8.4mA (12V) / ƒ?? 7.8mA (24V)
• Working temperature: -35C to +50C
• Terminals for wire up to 10mm2
• Size: 15.9 x 8.1 x 4.8 cm
• Weight: 300 g
• Multiple mounting holes for ease of installation

Please note: due to our warehouse arrangements,?ÿthe solar charge controller?ÿmay be shipped from a different warehouse?ÿto the solar panel and therefore?ÿdelivered in a separate package.

This product is covered by a?ÿ1 year warranty provided by Photonic Universe (including a 1 year warranty for the solar charge controller and a 1 year workmanship warranty for the solar panel). We will repair or replace defective items at our discretion.?ÿ

In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.

The kit includes a user manual?ÿfor the solar charge controller (see Documents tab)?ÿwhich explains wiring, installation and operations.

If you need help with installation or have any technical questions we can provide FREE?ÿsupport - please contact us by email or phone.