Majoni Brass Inflation Adaptor Kit With 4x Valves
Z37
- Dispatched in 2-3 days
- 30 Day Return Policy
- Low stock - 2 items left
- Backordered, shipping soon
Majoni Brass Inflation Adaptor With 4 x Valves
The threaded end of the adaptor that is smaller in size is meant to fit the Majoni Fenders. On the other hand, the larger end that comes in two different sizes is designed to fit foot, hand, and stirrup pumps. This adaptor helps in quickly restoring the pressure of buoys and fenders to the appropriate level using a compatible pump.
Instruction on replacing the Majoni valve:
To inflate your fender, follow these steps:
1. Screw the inflation adaptor into your fender.
2. Use pliers if necessary to pull out the valve with the inflation adaptor.
3. Unscrew the valve and screw in a new one into the inflation adaptor.
4. Insert the new valve into your fender with the inflation adaptor and apply pressure with your pliers.
5. Use the inflation adaptor to reinflate your fender.
Remember to use caution and follow these steps carefully for a successful inflation process.
How to Inflate your Majoni fenders:
The best way to inflate a fender is by using a compressor with a flat head to push air pressure against the valve. Alternatively, a bicycle or car pump with a special adaptor can also be used. However, it is important not to use a hand pump with a pin as this can damage the valve.
The recommended inflation pressure is 0.2 bar / 2.9 psi, which will allow you to easily press the body of the fender and make it visible.
For the products under £150 the shipping is £6.99.
Free delivery for the most items over £150.
