VICTRON PHOENIX INVERTER 12/800 230V WITH VE.DIRECT PORT

This Victron 800VA 12V Phoenix Inverter provides safe and efficient DC to AC power conversion with advanced configurable protection functions. It has an inbuilt VE.Direct port that enables remote system monitoring and programming through various communication methods.

Some key features of this Victron 12/800 Phoenix inverter include:

- High peak power handling: The inverter can handle peak power of up to 1500W, making it suitable for powering loads with high initial start-up power.

- Superior build quality: The unit is equipped with a toroidal transformer, which operates at a cooler temperature and higher efficiency compared to standard transformers.

- Inbuilt safety protection: It comes with important safety features such as protection against short-circuit, overload, battery overvoltage and overheating.

- Advanced monitoring and programming abilities: The inverter's VE.direct port allows remote system monitoring and programming via a PC/laptop using the free VictronConnect software (VE.Direct to USB cable sold separately). Alternatively, users can wirelessly connect via a smartphone/tablet using an additional VE.Direct Bluetooth dongle (sold separately).

- Power-saving ECO mode: The inverter switches to standby when the load power falls below a pre-set value, and switches on every 2.5 seconds (adjustable) to check whether load power has returned to a sufficient level.

- Dynamic cut-off feature: The inverter intelligently determines the DC disconnect voltage by monitoring the rate of discharge from the battery (connection to VictronConnect app/software required).

- Remote On/Off Power function: The inverter has a connection point for an optional remote on/off switch (not included).

- AC Power transfer: The inverter can be connected to an optional automatic transfer switch (not included) to transfer the load to another AC power source.

- LED Indicators: Red/green LEDs show inverter operation and status of various protection features.

The inverter comes with a UK 3-pin plug socket.

Specifications:

• Input DC voltage range: 9.2V - 17V
• Output AC voltage range: 230V 
• Output AC frequency: 50Hz / 60Hz (programmable with app)
• Continuous power at 25°C: 800VA / 650W
• Continuous power at 40°C: 560W
• Peak power: 1500W
• Zero-load power: 6.5W
• Default zero-load power in ECO mode: 1W (Default retry interval = 2.5s, adjustable)
• Output wave: pure sine wave
• Battery type: Sealed lead acid, Gel, AGM
• AC socket: UK (BS 1363)
• Minimum battery capacity: 100Ah
• Nominal inverter efficiency: 90%
• Low battery shutdown: 9.3V (programmable with app)
• Operating temperature range: -40°C to +65°C (fan assisted cooling)
• Maximum cable cross section: 25mm²
• Humidity (non-condensing): max. 95%
• Size: 105 x 230 x 325 mm
• Weight: 5.5kg

This product is covered by a 5 year manufacturer warranty.

The following documents are available to download:

User manual for Victron Phoenix Inverter 12/800 230V with VE.Direct port (VPX800-12)

Datasheet for Victron Phoenix Inverter 12/800 230V with VE.Direct port (VPX800-12)

Technical drawing for Victron Phoenix Inverter 12/800 230V with VE.Direct port (VPX800-12)