VICTRON PHOENIX INVERTER 12/375 230V WITH VE.DIRECT PORT

This Victron 375VA 12V Phoenix Inverter is designed to provide safe and efficient conversion of DC to AC power. It comes equipped with advanced configurable protection functions that ensure maximum safety and efficiency. Additionally, this Phoenix inverter has an inbuilt VE.Direct port that allows for remote system monitoring and programming through a range of communication methods.

Key features of this Victron 12/375 Phoenix inverter include:

- High peak power handling: With a peak power of 700W, this unit is useful for powering loads that require high initial start-up power.

- Superior build quality: The toroidal transformer used in this inverter operates at higher efficiency and with lower heat compared to standard transformers.

- Inbuilt safety protection: The inverter is equipped with protection against short-circuit, overload, battery overvoltage, and overheating.

- Advanced monitoring and programming abilities: The VE.direct port allows for connection to a PC/Laptop to access the free VictronConnect software. Alternatively, an additional VE.Direct Bluetooth dongle can be connected to wirelessly connect a smartphone/tablet to the inverter via the VictronConnect app. Through either of these connection methods, the user can remotely monitor the system and view important data such as Voltage (battery and AC output), a load indicator, and alarms. The user can also remotely program the system, specifying the low-battery cut-off level (and level for reconnection), the output voltage and frequency (50/60Hz), settings for the power-saving ECO mode, and program the inverter to use the ignition control of your vehicle for switching the unit On/Off.

- Power-saving ECO mode: The inverter switches into standby when the load power falls below a pre-set value. It will switch on every 2.5 seconds (adjustable) to check whether load power has returned to a sufficient level.

- Dynamic cut-off feature: The inverter intelligently determines the DC disconnect voltage by monitoring the rate of discharge from the battery (connection to VictronConnect app/software required).

- Remote On/Off Power function: This feature includes a connection point for an optional remote on/off switch (not included).

- AC Power transfer: The inverter can be connected to an optional automatic transfer switch (not included) to transfer the load to another AC power source.

- LED Indicators: Red/green LEDs show inverter operation and the status of various protection features.

The inverter comes fitted with a UK 3-pin plug socket.

Specifications:

• Input DC voltage range: 9.2V - 17V
• Output AC voltage range: 230V 
• Output AC frequency: 50Hz / 60Hz (programmable with app)
• Continuous power at 25°C: 375VA / 300W
• Continuous power at 40°C: 260W
• Peak power: 700W
• Zero-load power: 5.6W
• Default zero-load power in ECO mode: 0.9W (Default retry interval = 2.5s, adjustable)
• Output wave: pure sine wave
• Battery type: Sealed lead acid, Gel, AGM
• AC socket: UK (BS 1363)
• Minimum battery capacity: 40Ah
• Nominal inverter efficiency: 89%
• Low battery shutdown: 9.3V (programmable with app)
• Operating temperature range: -40°C to +65°C (fan assisted cooling)
• Maximum cable cross section: 10mm²
• Humidity (non-condensing): max. 95%
• Size: 86 x 165 x 260 mm
• Weight: 3kg

This product is covered by a 5 year manufacturer warranty.

The following documents are available to download:

User manual for Victron Phoenix Inverter 12/375 230V with VE.Direct port (VPX375-12)

Datasheet for Victron Phoenix Inverter 12/375 230V with VE.Direct port (VPX375-12)

Technical drawing for Victron Phoenix Inverter 12/375 230V with VE.Direct port (VPX375-12)